You have no items in your shopping cart.
Slim rectangular frame with easy install, all in one mounting system
Welcome to our Worry Free Fireplace Door Ordering System!
We care about getting your order right the first time. That’s why we provide each of our customers with their own friendly, personal fireplace door consultant to answer any questions and make sure your firebox measurements are correct so the door you order will fit perfectly.
There’s no need to stress if you have doubts about how you’re measuring. Simply place your order with the measurements of your firebox opening to the best of your knowledge. After we receive your order, a fireplace door consultant will be in touch with you shortly to confirm your order, check your measurements, and make any changes necessary before your order goes to production.
So go ahead and place your order now with confidence and we look forward to talking with you soon!
The Lexington Fireplace Door:
constructed of aluminum extrusions and is almost 33% thicker than any other extruded aluminum doors on the market. A highly durable dual corner-key construction technique and unique all-in-one mounting bracket set this door even further apart from the competition.
Designed with hidden ZC “Zero Clearance” slots in the main frame that are not visible on the outside allowing for adequate ventilation.
Frame Face for The Lexington: Extruded Aluminum
• 1” Frame Panel Width
• 3/8” Frame Depth
• 1” Door Frame
- Slim Rectangle Aluminum Frame prefect for tile, marble & granite
- Width: 1-1/16" Depth: 7/16" for super sleek appearance
- Durable dual corner-key construction for easy install.
- All-in-One mounting system & Positive catch door latches.
- Glass Color: Grey, Clear and Bronze
- 16 Powder Coat
- Custom slimline hinges allow doors to open 180
- Twin Cabinet or Bifold tempered glass doors
- Choice of Draft or No Draft Damper Assembly
How to Measure for Prefab (Factory Built) Fireplace Doors.
If you have a model number listed on our website you will only need to verify your opening height and width.
When building your door from the ground up we need an extra set of measurements for recess depth) and your pictures sent to firstname.lastname@example.org. This allows us to be sure that our door system will work properly and we know that you have measured in the right places.
3. Top recess depth
4. Bottom recess depth
5. Side recess depth
Here is another example of measuring recess depth:
How To Install The Lexington
Carefully remove the glass doors from the ZC ReFace Enclosure to make the it lighter for installation and to help prevent damage to the glass doors and the finish. NOTE: Frameless TotalView doors are not shipped installed. They will be found packaged in cardboard inside the master shipping carton.
Remove the optional Cabinet Mesh Screen Doors from the enclosure if they were ordered.
If Hanging Mesh Screens were ordered, instructions for installing them are packed with the screens. ▪ The mesh screen panels will be packed flat between layers of cardboard. Be careful not to discard the screens accidentally.
Set aside all of the parts removed in a safe place.
Remove any protective plastic film from any polished metal trim or overlay material on the ZC Glass Door frame or doors if applicable.
Start the Pressure Screws into the mounting tabs on the back side of the ZC Glass Door frame.
Set the ZC Glass Door frame into the ZC Fireplace firebox opening.
○ Check that the OEM screens (if retained) will operate smoothly with the new ZC Glass Doors installed. ○ If the OEM screens will not operate correctly contact your Brick Anew dealer to order screens to fit into the ZC Glass Doors.
CAUTION: Screens must be installed and operate properly on your ZC-Fireplace before lighting a fire. Never light a wood fire without proper screens installed on the ZC-Fireplace.
Center the ZC Glass Door in the firebox opening. Tighten the Pressure Screws evenly. Don’t over-tighten. (Figure 1) NOTE: All Glass Doors for ZC-Fireplaces are engineered with air spaces around the frame and air-gaps in the glass. These air-gaps are essential to help cool the ZC-Fireplace should the glass doors be closed during operation. Figure 1 shows an inside fit with gaps around the perimeter of the Glass Door. Overlap style doors will have air-gaps on the sides of the frame or behind the frame. Never use insulation or sealant on ZC Glass Door installations.
Under no circumstances should these air-gaps be tampered with or altered in any way.
Check that the ZC Glass Door frame is aligned level, straight, and square.
Replace the Glass Doors. Discard the shipping hinge screws if used. Use the color-matched permanent hinge pins that are taped to the glass doors if needed. NOTE: Some door styles use hinges that do not need separate hinge pins. NOTE: If the glass doors do not close properly or do not lay flat against the frame, the frame is most likely twisted. Loosen the pressure screws on the side of the frame opposite the glass door that is away from the frame. Move the bottom corner of the frame out until the doors line up properly. Retighten the pressure screw (s). NOTE: Failure to align the ZC Glass Doors properly may result in glass breakage or other damage directly attributable to improper installation.
Replace the Mesh Screen Doors if they were ordered with the ZC Glass Door. NOTE: If your are using the OEM screens that are part of the ZC-Fireplace make sure that they operate freely with the ZC Glass Door securely mounted. See CAUTION above.