5.0 Excellent 1 Review(s)
The Harrison Fireplace Mantel
$565.00+ Free Shipping
The Harrison wood fireplace mantel surround will be a classically styled addition to your home! Affordable and attractive, this fireplace mantel surround is made of real hardwood that will stand out in any room with it’s clean lines and beautiful character. This stunning fireplace mantel surround also features a beautiful fluted molding in the leg design and is customizable to fit your home’s character and your own personal style. This classic style wood fireplace mantel surround includes multiple options for finishing as an unfinished mantelpiece. You can stain this wood mantel surround to bring out the beautiful hardwood texture, or you can paint to match the look of the room.
- Protected by our sitewide guarantee
- Made with real hardwood
- Available in lengths 48", 50", 56"
- Available unfinished only
- Paint and Stain grade wood.
- Mitered Hanger Board and hardware is NOT included with this model mantel.
- Plinth Base Pairs are available to add extra height to your mantel.
- Light sanding and filling is recommended before paint or stain is applied.
- Weight: 60 pounds.
This wood mantel surround also comes in multiple sizes or can be custom designed to fit a fireplace with unusual proportions or an oversized hearth. With a great price and easy installation, everything is set for you to purchase this classic wood fireplace mantel surround now and see your dream home realized today!
A fireplace must warm our hearts even when there is no fire in the grate. The Harrison Fireplace Mantel ads beauty and elegance to your home. The Asian Hardwood Choi is a light colored tight grained wood which is similar in grain character to American White Oak and takes paint and stain beautifully.
Light sanding and filling is recommended before paint or stainis applied. This mantel has a 1 1/2" projection off of the wall leaving a nice pocket behind the mantel to accommodate your tile, stone, marble etc.
Mantel ships in 3 pieces; 2 legs and 1 header.
Mantel Dimensions 48, 50, 56
The Harrison Mantel
Width to outside leg at base:
Depth of leg at bottom:
(This fireplace mantel does NOT include mitered hanger board or mounting materials)
Put the mantel together by putting the main shelf on the floor, upside down. Next bolt on each leg with the hardware included with your mantel. This mantel does not come with miltered hangar board but is the suggestion from the production team. Hangar board can be obtained at most hardwar stores.
A hanger board may be fabricated using a 1x4, cut at a 45-degree angle. You may also cut a piece of wood that runs the length of the mantel shelf or use 2 blocks of wood that will be placed at either end of the mantel shelf. Set the mantel on the length of wood or blocks. Use finishing nails on back side of legs (right underneath the back overhang of the shelf) to fasten to length of wood or blocks.
The hanger board measurement should be taken from the floor or the hearth (where the mantel legs will sit or the shelf will hang) to the bottom edge of the hanger board. When mounted correctly, the mantel or shelf will simply hang on the hanger board and in the case of the mantel, the legs will touch the floor or the hearth.
While the mantel's shelf is on the floor, put the loose wall hanger board that is in the box on to the hanger board that is mounted on the mantel shelf. Use your hand to hold the 2 pieces together. When together correctly, the 2 hanger boards will form a complete board.
Measure from the bottom of the leg down to the wall hanger board and record this measurement. Measure both the left and right sides to insure that you have a correct measurement.
Mark your recorded measurement on your wall, both left and right. Take the wall hanger board and mount it on the wall so that the bottom of the board is on your recorded marks. Check to see that your wall hanger board is centered over your firebox before mounting.
Once mounted, if the mantel or shelf doesn't seem to fit snugly to the wall, you may put a small shim of paper, cardboard, etc., to fill the gap where the 2 halves of the hanger board meet.
Plinth Base Pairs add extra height when needed for this model fireplace mantel. Available in Unfinished. No. 40 Mission Oak, No. 30 Fruitwood, No. 50 Medium Oak Distressed (additional fee's apply) Finishes will vary from photo's as all mantels are unique. (shown here from left to right)
- The Harrison Fireplace Mantel Review by TOMS CORNER.....Staff
- TOMS CORNER........Hey, thank you for taking the time to review the Harrison Fireplace Mantel. Look at the picture above, it looks like oak grain when in fact it is Asian wood. This allows us to sell this mantel at a very competitive price. The Harrison is available in 3 sizes, comes with decorative trim, unfinished wood (requires slight sanding preparing the surface for stain or paint application). No reason anymore to delay ordering this mantel for your project. If you have any questions please contact us at 800-897-7175, our reps look forward to assisting you. Thanks........Tom
(Posted on 7/28/2014)