You have no items in your shopping cart.
Heritage 2 for Masonry Fireplaces
Quick Ship Standard Masonry | Welded Steel
In Stock: 2 Days After Confirmation
Features: Heavy 19 gauge mesh curtain included and installed with doors. Textured black frame finish and clear glass.
The Heritage 2 is a 1/4" welded steel plate enclosure with a 2 1/2" wide frame.
It is available as an overlap or inside fit.
The maximum overlap is, 1 1/2" each side, 1 1/2" top with and without mesh. T
The inner return of the frame will extend 2 1/2" into the opening.
We are proud to introduce the Heritage 2 Day steel fireplace enclosure with the same hand craftsmanship and heavy welded steel frame as the original but now offered in our 2 Day quick ship program. We analyzed the dimensions of over fifteen thousand fireplace openings and the outcome was a list of the some of the most common dimensions to fit the majority of standard fireplaces. Now, uncompromised quality and design are available at a moment’s notice, mesh curtains included
- DOOR STYLES: Available in FS2 bi-fold full-swing trackless doors.
- STANDARD GLASS: ¼” tempered clear glass with lifetime warranty.
- MESH OPTIONS: Heavy mesh curtain included and installed with doors.
Put the brackets on the side panels.
Use the self tapping screws to secure your frame into the firebox opening.
After you have made frame even, secure the frame, put the glass into the frame to complete your fireplace door installation.
Electric Drill, - 5/32 Drill Bit, #2 - Phillips Screwdriver
The first step is measuring your fireplace so that you get the right doors.
Watch the video tutorial
I Don't Know My Manufacturer or Model
When your fireplace manufacturer and model number can't be located, snap some photo's (as shown) send them and your measurements to firstname.lastname@example.org
Where to Measure
Measure the width and height of the steel opening where the enclosure will fit. This will be the same position that the fireplace manufacturer’s enclosure would be installed. Do not measure the finish material in front of the fireplace; brick, marble, slate, tile, etc.
Position the frame in the fireplace and center the frame between the left and right side of the fireplace opening.
It is Important that the frame is installed with the correct side up to insure smooth operation of the doors.
Attaching the Doors
With the handle at the top (handles must be at the top) fold door together, and locate the bottom door pivot pin.
With panel door at 45 degree angle, place door pivot pin into the frame bottom receiving hole clip.