3.0 Good 1 Review(s) The Ringwood Fireplace Mantel

More Views

The Ringwood Fireplace Mantel

+ Free Shipping

The Ringwood is a classic style mantel surround built just for your fireplace. Made of solid hardwood and finished in a traditional white, this fireplace mantel surround will be the perfect addition to your home! While it does come finished in set sizes, you can still personalize this wood fireplace mantel surround to be custom sized and fit the fireplace you have. We offer custom sizing upon request, and your finished mantel can even be painted a different color after a quick sanding!

  • Wood mantel - (hardwood similar to American white oak)
  • Available in lengths of 48" and 56" 
  • Available Unfinished
  • Paint and stain grade
  • Hanger Board kit included. 
  • Plinth's can be added when extra height is needed (see details below)
  • Protected by our site­wide guarantee

This is a beautiful custom hardwood fireplace mantel surround with a classic look and an affordable price. With easy installation and a complete mounting kit, we do all the hard work and make installation and positioning much easier for you. Order this wooden fireplace mantel kit today and make your fireplace room into an incredible common area for guests and family for years to come!

* Required Fields


Ringwood 120

The Ringwood Fireplace Mantel ads and elite style elegance to your home. The Asian Hardwood Choi is a light colored tight grained wood which is similar in grain character to American White Oak and takes paint and stain beautifully. 

Light sanding and filling is recommended before paint or stain is applied. 

Shown above in painted white and painted antique white in main photo

This mantel has a 1 1/2" projection off of the wall leaving a nice pocket behind the mantel to accommodate your tile, stone, marble etc.

Mantel ships in 3 pieces; 2 legs and 1 header.  


Mantel Dimensions 48" & 56"

The Ringwood Mantel
120- 48
120- 56
1 1/2"
1 1/2"
Interior Width
Interior Height
Width to outside leg at base:
63 1/2"
71 1/2"
Depth of leg at bottom:
Shelf Length:
Shelf Depth:
Overall Height:

Installation Suggestions:

Put the mantel together by putting the main shelf on the floor, upside down. Next bolt on each leg with the hardware included with your mantel. This mantel does not come with miltered hangar board but is the suggestion from the production team. Hangar board can be obtained at most hardwar stores.

A hanger board may be fabricated using a 1x4, cut at a 45-degree angle. You may also cut a piece of wood that runs the length of the mantel shelf or use 2 blocks of wood that will be placed at either end of the mantel shelf. Set the mantel on the length of wood or blocks . Use finishing nails on back side of legs (right underneath the back overhang of the shelf) to fasten to length of wood or blocks.

Miltered Hangar Board Assm

The hanger board measurement should be taken from the floor or the hearth (where the mantel legs will sit or the shelf will hang) to the bottom edge of the hanger board. When mounted correctly, the mantel or shelf will simply hang on the hanger board and in the case of the mantel, the legs will touch the floor or the hearth.

While the mantel's shelf is on the floor, put the loose wall hanger board that is in the box on to the hanger board that is mounted on the mantel shelf. Use your hand to hold the 2 pieces together. When together correctly, the 2 hanger boards will form a complete board.

Measure from the bottom of the leg down to the wall hanger board and record this measurement. Measure both the left and right sides to insure that you have a correct measurement.

Mark your recorded measurement on your wall, both left and right. Take the wall hanger board and mount it on the wall so that the bottom of the board is on your recorded marks. Check to see that your wall hanger board is centered over your firebox before mounting.

Once mounted, if the mantel or shelf doesn't seem to fit snugly to the wall, you may put a small shim of paper, cardboard, etc., to fill the gap where the 2 halves of the hanger board meet. 

Plinth's add height when you need it to our luxury wood mantels:

Both plinths that we offer can be used on this mantel.

Plinth Base Pair Available in Unfinished. No. 40 Mission Oak, No. 30 Fruitwood, No. 50 Medium Oak Distressed (additional fee's apply) Finishes will vary from photo's as all mantels are unique. (shown here from left to right)

Plinth Base Pair Finishes

Straight Plinth Base Pair Available in Unfinished, No 50 Medium Oak Distressed, No 80 French Country and No 70 Cherry Distressed as shown in the photo below. (left to right).


Paint and or Stain suggestions:

Before applying paint or stain to your wood mantel, we suggest that you lightly sand it followed by wiping it down with a damp cloth. When painting, we suggest using 2 coats of a stain blocking primer. Follow the instructions on the can. For staining, please follow the manufacturer's instructions. 

Customer Reviews

The Ringwood Fireplace Mantel Review by TOMS CORNER.....Staff
TOM'S CORNER......Hey...........Thanks for reviewing The Ringwood Fireplace Mantel. About the only thing you need to decide on this mantel is if you want paint or stain finish. Being solid wood the grain is highlighted. It is handcrafted with trim that sets this mantel apart from other mantels in this price range and is available in two sizes. Call today and take advantage of the savings you will experience with this purchase. Need a little help? Please contact our reps at 800-897-7175 and they will be glad to assist you.
Thanks...................................Tom (Posted on 7/28/2014)